| MBL600 | 1.0 - 7.0 | Dual DC | 200 - 400 | - | PSK32791B |
Control Inputs (All) : (Terminals 5, 6, 8, 9)
TTL-compatible
Logic "0" - 0 to 0.8 V
Logic "1" - 3.5 to 5.0 V
Clock Inputs : (Terminals 5 & 6)
Pulse required; 15 microseconds minimum. The clock input is
pulled up internally to +5Vdc through a 10K Ù resistor for
negative going clock inputs or pulled down to 0Vdc through a 10K
Ù resistor for positive going clock inputs.
Direction Control: (Terminal 5)
Logic "1" (open) - CW
Logic "0" - CCW
Excitation Mode Select: (Terminal 8)
Logic "1" - Half-step
Logic "0" - 2 ö Full-step
Power ON/OFF: (Terminal 9)
Logic "1" (open) - motor current on
Logic "0" - motor current off
Output Current Rating: (Terminals 1, 2, 3, 11, 12, & 13)
6.5 Amps per phase, maximum, over the operating voltage and
temperature range. Motor phase ratings of 1.0 Amp minimum are
required to meet the minimum kick level.
Power Requirements:
Low-voltage supply (Vlv) typically ranges between 3.5 and
6.5 Vdc. The maximum allowable low-voltage is 10 Vdc.
High-voltage supply (Vhv) is 55 Vdc nominal, 10 Vdc minimum
and, 70 Vdc maximum.
Operating Temperature : 0 to 60 degrees C
It is recommended that the unit be mounted on a larger
aluminum plate, or similar heat-conducting structure, whenever
possible.
This will prevent the driver from overheating and degrading
driver reliability. Fan cooling is also recommended whenever
possible.
The MBL600 requires a power supply kit. Consult the factory
for the best driver, power supply and motor application.