MicroStep Stepper Driver -
MBC10SI1
- Output Current of 10.0A Peak
- 2000 Steps/Revolution
- On-Board Programmable Simple Indexer with 2 Motion Profiles
- Pulses From 1Hz to 50kHz
- Directional Soft and Hard Limit Switch Inputs
- Complete Output
- Busy Output
- Motor On/Off Input and Automatic Current Reduction
- Short Circuit Protections
The MBC10SI1 is a low cost single axis step motor driver
integrated with a programmable simple indexer. The MBC10SI1
microstep driver/pulse generator has an output current capability of
1.5A minimum to 10.0A maximum (peak rating). The MBC10SI1 driver
operates with a DC voltage of 20VDC to 80VDC. The MBC10SI1’s
internal controller has two different programmable motion profiles.
The MBC10SI1 also has directional soft and hard limit switch
inputs, a busy output and a complete output letting the user know
when an index is finished. The driver features direction control and
motor current On/Off capabilities. The “Reduce Current Enabled”
feature automatically reduces motor current to 50% of the set value.
The driver has built in features to indicate power on (green LED),
running (yellow LED) and error conditions (red LED). The MBC10SI1
has a fixed step resolution of 2000 steps/ revolution for a 1.8º
stepper motor. The bipolar drive configuration handles 4, 6, and 8
lead step motors and is also equipped with over current protection.
The MBC10SI1 communicates via USB communication. The easy to use
Windows software, is used to directly set up the two different
motion profiles.
| MBC10SI1 | 1.5 - 10.0 | 20 - 80 VDC | 2000 | Internal Indexer | PSA80V4A-1 |