MicroStep Stepper Driver -
MBC25PG1 & MBC25PG1L
- Output Current of 2.5A Peak200 to 1600
- Steps/Revolution (1, 2, 4 and 8 Selectable
Step Operation)
- On-Board Pulse Generator
- Pulses From 50Hz to 44kHz
- Clock Output for Daisy Chaining
- Motor ON/OFF Input
- Short Circuit Protection
The MBC25PG1 microstep driver/pulse generator has an output
current capability of 0.5A minimum to 2.5A maximum (peak rating).
The MBC25PG1 driver operates with a DC voltage of 12VDC to 35VDC.
The logic inputs can be operated from +5VDC minimum to +24VDC
maximum. The MBC25PG1’s internal PG (pulse generator) is a linear
ramping PG designed to be used with this driver. It has adjustable
base speeds and max speeds, independent adjustments for acceleration
(ramping up) and deceleration (ramping down), jumper selectable
external or on-board max speed potentiometer and a jumper selectable
deceleration profile. The MBC25PG1 has features to accept a pulse
source from an external generator and a clock output of it’s
internal pulse generator that can be used to daisy chain MBC25PG1's
together. The driver is capable of running either one motor or two
motors in series with features that include direction control and
motor current On/Off capabilities. The "Reduce Current Enabled"
feature automatically reduces motor current to 70% of the set value.
The driver has built in features to indicate power on (green LED)
and clocks being received (yellow LED).
With the MBC25PG1, various step resolutions can be implemented
by using the on-board dip switch. The microstep divisions range from
200 steps/rev to 1600 steps/rev. The bipolar drive configuration
handles 4, 6, and 8 lead step motors and is also equipped with short
circuit, over temperature and crossover current protection.
MBC25PG1L is available for applications where an "L" bracket is
required for mounting. See dimensions below.
| MBC25PG1 | 0.5 - 2.5 | 12 - 35 VDC | 200 - 1600 | P.G. | PSAM24V2.7A |
| MBC25PG1L | 0.5 - 2.5 | 12 - 35 VDC | 200 - 1600 | P.G. | PSAM24V2.7A |