Linear Actuator Products
/images/table/Family - Tables (430x200).png
Anaheim Automation carries two types of Screw-Driven Positioning Tables: Standard Screw-Driven Tables and Precision Screw-Driven Tables. Our LS100 Table with unsupported rails and LS500 Table with supported rails utilize the stainless steel 400 series precision rolled lead screw, accurate up to 0.003"ft, with a burnished finish and a zero backlash nut. We also offer mulitple lines of tables that may fit your needS. These Screw-Driven Tables are available as Open-Loop or Closed-Loop Systems (wherein stepper motors are assembled with encoders), with several options available, such as light or heavy duty configurations, travel lengths, homing and limit switches, lead screw pitch, as well as many stepper motor choices. Ideal for pick-and-place operations, circular and linear interpolation, point-to-point motion, pin-insertion, inspection and test equipment, engraving, part positioning and assembly, these Screw-Driven Tables yield a great cost/performance ratio.


  • Belt Driven Linear
  • Stroke Lengths up to 48 Inches
  • Dynamic loads up to 200 lbs
  • Speeds up to 100 in/sec
  • Linear Guide Motion
  • Compatable with any Nema 23 Motor or any 60mm Frame Servo Motor
  • Metric Motor Mounts Available
  • Additional Accessories Available
  • Type: ACME Screw
  • Travel Options: 0.4 - 18 Inches
  • Accuracy: 0.003 in/ft
  • Speed: Up to 12 in/s (305 mm/s)
  • Zero Backlash
  • Heavy Duty Applications, Up to 8,000 lbs
  • Supported Rails, Low-Profile Design. Motor, Encoder, and Cable Options
  • Type: Ball Screw
  • Travel Options: 100 - 1,240mm
  • Accuracy: 20µm/mm
  • Speed: Up to 1,500 mm/s
  • Backlash: .005mm
  • Dynamic Loads up to 6699 lbs
  • Motor, Encoder, and Cable Options. Build Part Number to your Requirements
  • Type: Ball Screw
  • Travel Options: 100 - 2,000mm
  • Accuracy: Up to 50μm/mm
  • Speed: Up to 1,673 mm/s
  • Backlash: 0.02-0.005mm
  • Heavy Duty Applications, Up to 200kg (441lbs)
  • Optional Kits: Limit Sensors, Motor Mounting Kits, Square Nuts, and Module Mounting Plates. Fully Enclosed Aluminum Casing and Belt
  • X-Axis Stoke Length: 250-2,000mm
  • Y-Axis Stroke Length: 100-1,000mm
  • Backlash: .02-.005mm
  • Transportable Mass: Up to 40kg
  • Fully covered aluminum casing with belts to elimnate contaminates
  • Optional Limit Sensor Kits, Motor Mounting Kits, and Home Positioning Sensor Kits
  • From 25mm to 55mm Diameter
  • Reduction Ratios up to 132:1
  • Max load up to 130kg (287lb)
  • Max Speed up to 58mm/s (2.283in/s)
  • Stroke Lengths up to 300mm (11.8in)
  • IP54 Protection Standard
  • Encoder and Limit Switch Options Available
© 2017 Anaheim Automation, Inc. - All Rights Reserved