MBC05641 - Stepper Drivers with DC Input
  • Output Current 5.0 Amps Peak
  • 200 to 12,800 steps/rev (1,2,5,10,16,32 and 64 selectable step operations
  • Short Circuit Protection
  • Size: 5.4"L x 1.868"W x 3.36"H
  • No Minimum Inductance
  • Optical Isolation
  • Motor On/Off Input
  • RoHS Compliant
Stepper Drivers with DC Input - MBC05641

The MBC05641 Microstep Motor Driver has an output current capability of 0.5 Amps minimum to 5.0 Amps maximum (Peak Rating). The MBC05641 driver operates from a DC voltage of 24-48 Volts. The inputs are optically isolated with a minimum sourcing of 7.0mA per input (+3.5VDC minimum to +24VDC maximum). The clock input is set to receive either positive or negative edge clocks with a maximum frequency of 400kHz. The MBC05641 driver offers direction control and motor current ON/OFF capabilities. The Reduce Current Enabled automatically reduces motor current to 50% of set value after the last step is made (1sec delay). The driver has built-in features to indicate power on (Green LED), clocks being received (Yellow LED), and fault conditions (Red LED). A power supply is required and must be purchased seperately.
See Accessories on this website for driver adders, such as shielded motor cables, connectors, and power supply options. For compatible high-torque stepper motors, consider our popular 23Y, 24Y, 34Y and 42Y series.

Item Current
Range
(A)
Voltage
Requirement
Steps
per
Revolution
Pulse
Generator/Controller
Recommended
Transformer
Price
(USD)
Quantity
Discounts
Stock
Status
Add To
Cart
MBC05641 0.5 - 5.0 24 - 48 VDC 200 - 12800 - PSA40V4A-1 $186.00 view here
Quantity Discounts
1pc. $186.00
10pc. $186.00
25pc. $186.00
50pc. $184.00
100pc. $161.92
Contact Us for Quantities over 100
48 in Stock Add to Cart

  • Dimensions
  • Wiring Diagram
Stepper Drivers - MBC05641 Dimension
Stepper Drivers - MBC05641 Wiring
Dimensions
Stepper Drivers - MBC05641 Dimension
Wiring Diagram
Stepper Drivers - MBC05641 Wiring
© 2017 Anaheim Automation, Inc. - All Rights Reserved