Stepper Programmable Controller - PCL511
- Cost Effective Programmable Controller
- RS485/RS232 Serial Communications
- Up to 32 Axis Can Be Networked
- Non-Volatile Stored Programming
Memory
- Easy to Use Windows Software Included
- Capable of Real Time Motion
- Looping, Branching, Motion, I/O, and More
- Hard, Soft, and Home Limit Switch Inputs
.gif)
The PCL511 programmable controller is an economical single axis step motor controller containing 2 Kbytes of non-volatile
stored programming memory. It provides flexible, independent control of step motors with clock and direction outputs from
computers or machine controllers with a serial port. It is also capable of stand-alone operation making it an embedded machine
controller. The easy to use Windows software, SMC50WIN, can be used to directly control motion and to program the controller.
The PCL501PC programmable controller also has the ability for real time functions. A "Direct Mode" is used to directly control
motion for real time movements through serial communication. The PCL501PC programmable controller has 20 commands which are
easy-to-remember for direct movement of a step motor. The controller communicates via RS485 communication. Up to 32 units can
be networked from one communications port on a PC or PLC. A RS232 version (the PCL501PC) is available for single unit
communication. The PCL511 programmable controller has 2 programmable open drain outputs and 4 TTL compatible inputs. It can
be powered with DC (5-24VDC) or AC (8-16VAC) voltages. It’s compact size and mounting provisions make it simple to install.
*Optional Modules and Accessories for Programmable Controllers - These include a Thumbwheel Switch Module and Terminals for Communication.
| Power Requirements: |
5VDC @ 50mA or
8VDC to 24VDC @ 25mA or
8VAC to 16VAC @ 25mA
|
| Operating Temperature: |
0 to 60 degrees C |
| Pulse Output Range: |
77 to 15000 pps |
| Inputs (TTL - CMOS): |
Logic "0": 0 to 0.8VDC
Logic "1": 3.5 to 5.0VDC |
| Baud Rate: |
1200 to 115200 BAUD |
| Data Format: |
Half-Duplex, 1 start bit, 8 data bits, no parity, 1 stop bit |
| Outputs(2 Programmable I/O): |
Open Drain Type
40V, 75mA |
| Outputs (CLK, DIR): |
Open Drain Type
40V, 75mA |
| Part Number |
Description |
| PCL511 |
RS485 Compatible Controller |
| PCL511PC |
RS232 Compatible Controller (not multi-drop compatible) |
| DPC40501 |
Controller/Drive pack - Features a 4 amp bipolar driver and power supply |
| 485SD9TB |
RS232 to RS485 |
| PSAM24V1.2A-5V3.5A |
Power Supply for PCL501 and PCL501PC(24@1.2A 5V@3.5A) |