.PNG){kind=spacer}
Stepper Motors with Integrated Drivers
The Integrated Stepper Motor is an economical motion control system, because of its built-in microstep driver and controller electronics integrated into the stepper motor assembly. The Integrated Stepper Motor series takes the guesswork out of stepper motor and driver compatibility. The 17MD, 23MD and 34MD series are excellent for simple motion applications. The bipolar microstep driver features resolutions from 200-1600 steps/revolution, and over-temperature and short-circuit shutdown provisions. Integrated Stepper Motors, drivers and controllers are available in NEMA sizes 17, 23, and 34 with torque ratings from 31 to 1,700 ounce inches. The high-torque stepper motor used in the Integrated Stepper Motor series offer 1.8 degree step angle, with stack lengths of 1/2, 1, 2, or 3, providing for a range of start-up torque and inertia. Special stepper motor windings and shaft modifications are available; as well as encoder adders for remote monitoring of position.
Integrated Stepper Motors include built-in microstep driver electronics, eliminating the need for motor wiring and hookup. The 17MD series is available in three stack lengths, delivering from 31 to 62 ounce inches of torque. The bipolar microstep driver features resolutions from 200-1600 steps/revolution, providing smooth rotary operation. The 17MD Series comes in a single shaft version with 3 different motor stack lengths allowing for varying amounts of start-up torque and inertia. A power supply is required (purchased separately).
.png "Stepper Motors with Integrated Drivers - 17MD")
Integrated Stepper Motors include built-in microstep driver electronics, eliminating the need for motor wiring and hookup. The 23MD series is available in four stack lengths, delivering from 76 to 425 ounce inches of torque. The bipolar microstep driver features resolutions from 200-1600 steps/revolution, providing smooth rotary operation. The 23MD Integrated Stepper Motor is available in either a single-shaft version or a double-shaft version with optional encoder. A power supply is required (purchased separately).
.png "Stepper Motors with Integrated Drivers - 23MD")
Integrated Stepper Motors include built-in microstep driver electronics, eliminating the need for motor wiring and hookup. While the 23MSD is similar to the 23MD the main difference is that the 23MSD has higher microstep divisors of 256, 64, 8 or 2. The 23MSD series is available in four stack lengths, delivering from 76 to 425 ounce inches of torque. The bipolar microstep driver features resolutions from 200-51,200 steps/revolution, providing smooth rotary operation. The 23MSD Integrated Stepper Motor is available in either a single-shaft version with optional encoder. A power supply is required (purchased separately).
Integrated Stepper Motors include built-in microstep driver electronics, eliminating the need for motor wiring and hookup. The 34MD series is available in three stack lengths, delivering from 637 to 1700 ounce inches of torque. The bipolar microstep driver features a fixed resolution of 2000 steps/revolution, providing smooth rotary operation. The 34MD Integrated Stepper Motor is available in either a single-shaft version or a double-shaft version with optional encoder. A power supply is required (purchased separately).
.png "Stepper Motors with Integrated Drivers - 34MD")