HMI Videos

Do you need an HMI for your application, but don't know where to start? In this video we will discuss the steps for choosing the ideal HMI for your project.

This video demonstrates how to create a Timer and use a macro in a program to display time on an HMI. This tutorial will walk you through the steps of creating a timer, macro, number display and displaying the frame. This example will show you the basics of handling a timer control.

This video demonstrates Servo Motor Analog Speed control through an HMI and PLC. We cover all of the necessary parameters that need to be set in the PLC and create a GUI in the HMI to access the necessary registers in the PLC.

This video demonstrates how to create a program on an HMI which will send ASCII commands to a controller. This tutorial will walk you through the steps of formatting your text, storing your text and how to send your text from the HMI to the controller. With this simple tutorial you can easily export the ASCII commands specific to your controller.

An overview of basic components in the HMIWare editing software, such as bit state lamp, bit state setting and bit state switch.

This tutorial will walk you through the setup process for downloading your program to the Kinco Series HMI. This allows you to remotely program your HMI as long as you are on the same default gateway. Ethernet download allows you to leave your existing application intact and make updates at will.

In this tutorial, you will learn how to control a Kinco CV100-2S-0007G VFD using the MT4434TE HMI with the Modbus RTU protocol.

This video demonstrates how to add your own logo to an HMI on Start Up. This tutorial will walk you through the steps of importing a new logo and displaying it at start up.

This video will walk you through the process of assigning our HMI device the correct device drive. Often time Windows will find a best suited device driver (So it thinks) but this automatically installed driver is incorrect, this video will instruct you on correcting this fatal error.

This video demonstrates how to create a Hello World program on an HMI. This tutorial will walk you through the steps of creating a new frame, writing text to the frame, and displaying the frame. This example will show you the basics of handling and managing windows and frames.