Video Tutorials

In this tutorial, we cover the PJOG function block for transistor-based PLCs.

This video explains the fundamentals of microstepping compared to full-step excitation.

A quick comparison between Single-Ended and Differential type encoders, this video explains the features and benefits of each encoder, while providing tips on optimizing signal quality.

This video explains step by step, how to install a Single-Ended Encoder. This video is specific to the Anaheim Automation A3 series only.

This video explains step by step, how to install a Single-Ended Encoder. This video is specific to the Anaheim Automation A2 series only.

Important features of the stepper motor, a high-quality product available at Anaheim Automation. A wide variety of low-cost motion control products are available to choose from, along with the help of a friendly and knowledgeable technical staff.

This instructional video will guide you through the process of configuring the EDB Servo drive to run in Speed Control mode. This will show you which Servo Drive registers to modify so that you can run the Servo Motor at desired speed along with desired acceleration/deceleration times. This video is specific to the Anaheim Automation EDB Servo Driver series only.

This video is the first of a series of tutorials that will teach you how to work with the Android SDK in the Eclipse development platform. This tutorial specifically shows you how to install all the necessary components needed for Android Development.

This video demonstrates the configuration of PCL501 controllers to control a 4 axis system. This will cover the setup, the connection and instruction set. Our goal will be to slew all four axis simultaneously.

This tutorial will walk you through the setup process for downloading your program to the Kinco Series HMI. This allows you to remotely program your HMI as long as you are on the same default gateway. Ethernet download allows you to leave your existing application intact and make updates at will.