Page 5 - Blog

How do External Linear Stepper Actuators work? Unlike Captive and Non-Captive Stepper Actuators, external linear actuators use a nut in addition to the usual threaded leadscrew. As the motor rotates the screw, the nut translates the rotary motion into linear motion as it moves along the shaft of the leadscrew.

This video is the Brushless DC Driver hookup tutorial for the MDC100-050101. The video involves nine easy steps to follow when hooking up a Brushless DC Driver. These steps will show how to connect the driver to the power supply and motor.

A quick comparison between Single-Ended and Differential type encoders, this video explains the features and benefits of each encoder, while providing tips on optimizing signal quality.

This video explains step by step, how to install a Single-Ended Encoder. This video is specific to the Anaheim Automation A3 series only.

This video explains step by step, how to install a Single-Ended Encoder. This video is specific to the Anaheim Automation A2 series only.

This video explains step by step, how to install a Differential-Type Encoder. This video is applicable to Anaheim Automation's A5 series only.

This video demonstrates how to create a Hello World program on an HMI. This tutorial will walk you through the steps of creating a new frame, writing text to the frame, and displaying the frame. This example will show you the basics of handling and managing windows and frames.

This video will walk you through the process of assigning our HMI device the correct device drive. Often time Windows will find a best suited device driver (So it thinks) but this automatically installed driver is incorrect, this video will instruct you on correcting this fatal error.

This video demonstrates how to add your own logo to an HMI on Start Up. This tutorial will walk you through the steps of importing a new logo and displaying it at start up.

In this tutorial, you will learn how to control a Kinco CV100-2S-0007G VFD using the MT4434TE HMI with the Modbus RTU protocol.