Optical Rotary Encoders

Optical Rotary Encoders | Anaheim Automation, Inc.

Information

Anaheim Automation's Optical Rotary Encoders provide a comprehensive motor feedback solution for a variety of applications.

  • Single-Ended or Differential Outputs for A/B/I Channels
  • Compatible with .059" - 1.00" Diameter Motor Shafts
  • 32 to 5,000 Cycles Per Revolution (CPR)
  • 128 to 20,000 Pulses Per Revolution (PPR)
  • Optional Third and Fouth Index Channels
  • Track Up to 100,000 Cycles Per Second
  • Operating Temperature of -40 to +100°C
  • Powered From a Single +5VDC Power Supply
  • 2-Channel Quadrature Squarewave Outputs
  • Allows for ± .010" Axial Shaft Play
  • Compact Rugged Housing

Featured Series

ENC-EC35
  • Single-Ended or Differential
  • U/V/W Commutation Output
  • With Index Gating
  • Resolution: 500-60,000 CPR
  • Required Voltage: +5VDC
  • Bore Diameters: .197"-.394"
ENC-S4TD
  • Differential Miniature Optical Shaft Encoder
  • High strength snap-in polarized connector
  • Resolution: 100-1000 CPR
  • Required Voltage: +5VDC
  • Shaft Diameters: 0.125”-0.250”
ENC-S4TS
  • Single-Ended Miniature Optical Shaft Encoder
  • High strength snap-in polarized connector
  • Resolution: 100- 1000 CPR
  • Required Voltage: +5VDC
  • Shaft Diameters: 0.125”-0.250”

Items 25 to 27 of 27 total

Page
Show per page

Designed to mount to motor shafts of 0.59" to 1.73" and powered by a +5VDC to 30VDC input voltage, these encoders are available in single-ended or differential output options for A/B/I channels. They offer a range of output configurations including open-collector, line-driver, push-pull, or analog. The 2-channel quadtrature squarewave outputs further enhance the precision and reliability of these units. With a wide range of resolutions from 2 to 10,000 cycles per revolution (CPR) and 8 to 40,000 pulses per revolution (PPR), as well as an optional third and fourth index channel, these encoders will help ensure that your motor is operating at peak accuracy.

Note: Encoders can be mounted in-house to any compatible dual-shaft Anaheim Automation motor for a nominal fee. Custom Encoder Cable lengths are available upon request. To discuss your application requirements or to request a custom assembly, please contact our Customer Service Representatives.