JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Kinco PLC

Kinco PLC | Anaheim Automation, Inc.

Information

Anaheim Automation's Programmable Logic Controllers (PLCs), in conjunction with our line of HMIs, are designed to optimize the performance, reliability, and functionality of your motion control system. Our K2, K5, and KS CPU modules are capable of handling up to 136 I/O points and are equipped with a variety of integrated features. Also available are a range of Expansion Modules in Discrete and Analog I/O to allow the PLC to accommodate additional I/O points and communication protocols, add memory, and more.

Note: For assistance with making a selection or programming your PLC, contact our Customer Service Representatives, or submit our PLC Application Form.

High Performance 32-Bit, 520 MHz CPU
Minimum Cycle Time of 0.1ms
CANopen 2.0 Communication
2MB Program Memory

Photoelectric Isolation I/O
2 CAN Ports, 2 Serial Ports, 1 Ethernet Port
Supports Remote Downloading/Monitoring/Debugging

Featured Series

KNC-PLC-K541

Expansion Module, CANopen Communication
Supports CAN2.0A and CAN2.0B Standard
Communication Baudrates Ranging from 10K~1Mbps
Boot-Up Configurable via KincoBuilder
Supports:

72 CANopen Slave Stations
Network Management (NMT)
Process Data Objects (PDO)
Service Data Ojects (SDO)
Preset Emergency Messages
Node Protection
Heartbeat Messages

KNC-PLC-K606

CPU Module
Four High-Speed Counters
Four Pulse Train/PWM Outputs
14 Sinking or Sourcing Inputs
10 Outputs
2 RS485 Ports + 1 Ethernet Port
Supports Modbus TCP Protocol
Communicate with up to 32 Devices
Up to 14 Expansion Modules

KNC-PLC-K608

CPU Module
Four High-Speed Counters
Four Pulse Train/PWM Outputs
24 Sinking or Sourcing Inputs
16 Outputs
2 RS485 Ports + 1 Ethernet Port
Supports Modbus TCP Protocol
Communicate with up to 32 Devices
Up to 14 Expansion Modules

KNC-PLC-K621

Expansion Module for K6 Series
8 or 16 Inputs
Sinking or Sourcing Configuration
Rated for 3.5 mA @ 24 VDC
Inputs are Opto-isolated
LED Display to Monitor Running Conditions
Easy Maintenance and Installation

KNC-PLC-K622

Expansion Module, Discrete Outputs
8 or 16 Outputs
Transistor or Relay Options
Transistor Outputs are Rated for 500 mA @ 24 VDC
Relay Outputs are Rated for 2 A @ 30 VDC or 250 VAC
Transistor Outputs are Opto-isolated
LED Display to Monitor Running Conditions
Easy Maintenance and Installation

KNC-PLC-K623

Expansion Module, Discrete I/O
4 Inputs and 4 Outputs or 8 Inputs and 8 Outputs
Inputs Can be Configured to Sink or Source
Transistor or Relay Outputs
Inputs are Opto-Isolated
Transistor Outputs are Opto-Isolated
LED Display to Monitor Running Conditions
Easy Maintenance and Installation

KNC-PLC-K631

Expansion Module, Analog Inputs
Resistance Temperature Detector Module Offered
Current and Voltage Input Module Offered
Provides Wide Input Range
Up to 14 Analog Input Modules in One PLC-K6 System
12-bit Conversion for High-Resolution Measurement
Very Reliable ±0.3% Error

KNC-PLC-K632

Expansion Module, Analog Outputs
Current and Voltage Outputs
Provides Wide Output Range
Up to 14 Analog Output Modules in One PLC-K6 System
12-bit Conversion for High-Resolution Measurement
Very Reliable +/-0.3% Error

KNC-PLC-K633

Expansion Module, Analog I/O
Current and Voltage Inputs
Current and Voltage Outputs
Provides Wide Input/Output Range
Up to 14 Analog Input/Output Modules in One PLC-K6 System
12-bit Conversion for High-Resolution Measurement
Very Reliable +/-0.3% Error

KNC-PLC-K680

Expansion Module, Power Supply
Input Voltage: 85-265VAC
Output Rated Current: 5V 1A / 24V 250mA
If Using More than 7 Expansion Modules the KNC-PLC-K680 is Recommended
Software Does Not Require Configuration
Does Not Use the Address of I/O Image Area
Can be used in addition to up to 14 other expansion modules

KNC-PLC-KB6

Add-on Module for K6 PLC CPU
KB6-CAN: 1 CAN Bus Interface
Two Serial Communication Ports

KB6-2COM: 1 RS232 (Port0)

KB6-2COM: 1 RS485 (Port3)

KB6-4DI: 4 Direct Inputs
KB6-4DO: 4 Direct Outputs

KNC-PLC-KS105

CPU Module
Four High-Speed Counters, Max 200 kHz
Four High-Speed Outputs, Max 200 kHz
24VDC Power Required
8 Digital Inputs, 8 Digital Outputs
3 year Lithium Battery for Data Retention
Multiple Communication Ports
4K Bytes of Programming Instructions
5K Bytes of Data
448 Bytes of EEProm Backup