We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Stepper Drivers with Preset Indexers
Stepper Drivers with Preset Indexers | Anaheim Automation, Inc.
Information
Anaheim Automation manufactures Stepper Motor Drivers with Manual Preset Indexers in both modular or Driver Packs packaging styles.
- Current Range: 0.5 to 12.5 Amps
- High-Performance, Bilevel and Microstep Drivers
- Offered as One or Two-Axis Units
- Counter Modules Available Separately
- Driver, Indexer and Power Supply Packages
Featured Series
.png)
DPD72451
- Single-Axis Driver Pack with Built-In Manual Preset Indexer, Power Supply, and Cooling Fan
- Drives 4-Phase Stepper Motors Rated for 1-7 Amps per Phase
- Bilevel Drive Technique Prevents EMI, RFI, and Motor Overheating
- Preset Indexer can be operated manually or via PLC
- Functions: Home, Hard and Sift Limit Inputs, Two Homing Modes, Jog/Run, Fast Jog, and Switch-Selectable Base Speed, Max Speed, and Acceleration/Deceleration
DPF72452
- Two-Axis Driver Pack with Built-In Manual Preset Indexer, Power Supply, and Cooling Fan
- Drives 4-Phase Stepper Motors Rated for 1-7 Amps per Phase
- Bilevel Drive Technique Prevents EMI, RFI, and Motor Overheating
- Preset Indexer can be operated manually or via PLC
- Functions: Home, Hard and Sift Limit Inputs, Two Homing Modes, Jog/Run, Fast Jog, and Switch-Selectable Base Speed, Max Speed, and Acceleration/Deceleration
.png)
DPFHP451
- Internal Index Count Switches
- Pulse Rates up to 14,792 pulses per second
- Very High Motor Power Output
- 15 Amps/phase Maximum Operating Current
- 10 Amps/phase Standstill Motor Current
- Dual Voltage Power Supply with 500 VA Transformer
- Bilevel Drive (No RFI or EMI Problems)
- Half-Step and Full-Step Operation
- TTL/CMOS Compatible Inputs
- CW and CCW Index Inputs
.png)
MBC25SI1TB
- Output Current: 2.5A Peak
- 200 to 1600 Steps/Revolution (1, 2, 4, and 8 Selectable Step Operation)
- On-Board Programmable Simple Indexer with Four Motion Profiles
- Pulses from 1Hz to 50kHz
- Directional Soft and Hard Limit Switch Inputs
- Clock Output for Daisy Chaining
- Busy Output
- Motor On/Off Input and Automatic Current Reduction
- Short Circuit Protection
This product line is offered in one or two-axis board-level models that can drive 2 and 4-phase stepper motors rated at 0.5 to 12.5 Amps per phase, model dependent. The Manual Preset Indexer can be operated manually or with a Programmable Logic Controller (PLC) to index a set of pulses determined by the internal count switches or an external count module.
For assistance with making a selection, please contact our applications engineers to discuss your requirements. Shop our extensive line of Stepper products to complete your system.