We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Stepper Drivers with Pulse Generators
Stepper Drivers with Pulse Generators | Anaheim Automation, Inc.
Information
Anaheim Automation's Stepper Motor Drivers with built-in Pulse Generators in three current ranges.
- Current Range: 0.5 to 10.0 Amps
- Bilevel and Microstep Drivers
- PCB, Modular/Enclosed Packaging Styles
- Offered as Single-Axis Units
- Driver, Pulse Generator, and Power Supply Packages
Featured Series
.png)
DPD72PG1
- Bilevel Step Motor Driver Pack with Linear Ramping Pulse Generator
- Integrated 300 Watt Power Supply
- 10Amps/Phase Maximum Operating Current
- 7 Amps/Phase Standstill Motor Current
- Adjustable Base and Max Speeds
- Half-Step and Full-Step Operation
- Bilevel Drive Operation
- No RFI or EMI Problems
- TTL/CMOS Compatible Inputs
- Motor Turn-Off Input
DPS32PG1
- Bilevel Step Motor Driver Pack with Linear Ramping Pulse Generator
- 100 Watt Transformer
- 110/200 V Operation
- Short Circuit Protection, Open Motor Protection, Fault LED
- 5Amps/Phase Operating Current
- 3.5 Amps/Phase Output Current
- Unipolar Operation
- Half-Step and Full-Step Operation
- Motor On/Off Input
- Adjustable Base and Max Speeds
- No RFI or EMI Problems
- TTL/CMOS Compatible Inputs
- +5VDC Power Supply Output
.png)
MBC10P31
- Single-Axis Bipolar Driver with Pulse Generator
- Output Current: 10.0A Peak
- 2000 Steps/Revolution
- On-Board Programmable Pulse Generator with 2 Motion Profiles
- Pulses from 1Hz to 50kHz
- Directional Soft and Hard Limit Switch Inputs
- Pulse Generator Clock Output
- Busy Output
- Motor On/Off Input and Automatic Current Reduction
- Short Circuit Protection
.png)
MBC25P11
- Microstep Driver with Pulse Generator
- Output Current: 2.5A Peak
- 200 to 1600 Steps/Revolution (1, 2, 4, and 8 Selectable Step Operation)
- Drives Two Motors in Series
- On-Board Programmable Pulse Generator
- Pulse from 77Hz to 15kHz
- Directional Soft and Hard Limit Switch Inputs
- Clock Output for Daisy Chaining
- Busy Output
- Motor On/Off Input and Automatic Current Reduction
- Short Circuit Protection
-(300x200).png)
These Stepper Drivers are offered in single-axis printed circuit board (PCB), enclosed modular, and Driver Pack styles. Our Stepper Driver Packs with built-in Pulse Generators employ the bilevel drive technique and include a matched power supply, while models like the MBC10P31 are economical microstep drivers with an integrated programmable pulse generator, and are packaged in a sheet metal enclosure. The printed circuit board and modular styles require an external power supply, which is purchased separately.
For assistance with making a selection, please contact our applications engineers to discuss your project requirements.