We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
With an acceptable minimum shaft length of .275" and maximum shaft length of .395". Shaft sizes ranging from .079" to .250" in diameter, the ENC-A4TS is a single-ended miniature encoder designed for high volume applications with space limitations. The ENC-A4TS module is designed to detect the rotary position with a code wheel. When attached to the end of a shaft, the encoder provides digital feedback information for motion control applications that require position, speed and/or direction control. This single-ended miniature encoder consists of a LED source lens and a monolithic detector IC enclosed in a small polymer package. These modules implement phased array detector technology providing superior performance and tolerances over traditional aperture mask type encoders. The ENC-A4TS series provides digital quadrature outputs on all resolutions and are capable of sinking or sourcing 8 mA each. These encoders are powered from a single +5VDC power supply and are RoHS compliant.
*Select a part number from the chart below or build your own part number using the Ordering Information tab at the bottom of the page. ENC-CBL-CA-MIC4 Cables and Centering Tools are also available. For instructions on installing your encoder to a motor, view our step by step video tutorial here.
Item | Cycles Per Rev (CPR) | Bore Size | Index Channel | Cover | Price (USD) | Add to Cart |
---|---|---|---|---|---|---|
ENC-A4TS-1000-250-M | 1000 | .250" | No | Cover | N/A | Call Us |
ENC-A4TS-0512-188-H-M | 512 | .188" | No | Hole in Cover | N/A | Call Us |
ENC-A4TS-0500-157-M | 500 | .157" | No | Cover | N/A | Call Us |
ENC-A4TS-0400-125-H-M | 400 | .125" | No | Hole in Cover | N/A | Call Us |
ENC-A4TS-0360-250-M | 360 | .250" | No | Cover | N/A | Call Us |
ENC-A4TS-0360-250-H-M | 360 | .250" | No | Hole in Cover | N/A | Call Us |
ENC-A4TS-0360-197-H-M | 360 | .197" | No | Hole in Cover | N/A | Call Us |
ENC-A4TS-0300-197-H-M | 300 | .197" | No | Hole in Cover | N/A | Call Us |
ENC-A4TS-0300-125-M | 300 | .125" | No | Cover | N/A | Call Us |
ENC-A4TS-0250-197-H | 250 | .197" | No | Hole in Cover | N/A | Call Us |
ENC-A4TS-0200-250-M | 200 | .250" | No | Cover | N/A | Call Us |
ENC-A4TS-0200-157-M | 200 | .157" | No | Cover | N/A | Call Us |
ENC-A4TS-0100-250-H-M | 100 | .250" | No | Hole in Cover | N/A | Call Us |
ENC-A4TS-0100-079-M | 100 | .079" | No | Cover | N/A | Call Us |
We can mount your encoder to any compatible dual-shaft Anaheim Automation motor for you! Please see SN8 Series Encoder Adders to learn more, or Contact Us for assistance.