All Products

Stepper
  • Torque: 2.5 to 5,700 Ounce-Inches
  • Sizes: NEMA 08, 11, 14, 15, 17, 23, 24, 34 and 42
  • 1.8 and 0.9 Degree, Square-Bodied, High-Torque Stepper Motors
  • Up to Four Stack Lengths, Several Windings in Each Frame Size
  • Four, Six or Eight Lead Wires, Or Conduit Boxes
  • Customization and Motor Adders Available
  • Drop-In Replacement for Most Competitors, at Huge Savings!
  • Torque: 40 to 1,575 Ounce-Inches
  • Sizes: NEMA 23, 34 and 42
  • 1.8 Degree, Round-Bodied, "Legacy" Motors
  • Up to Three Stack Lengths, Several Windings in Each Frame Size
  • Six or Eight Lead Wires, Or Conduit Boxes
  • Specials and Motor Adders Available
  • Save on Drop-In Replacement of Competitors
  • Torque: 1 to 23 Ounce-Inches
  • Sizes: 15 to 57mm Diameter
  • Cost-Effective, Brushless Stepper Motors
  • Customization and Motor Adders Available
  • Drop-In Replacement for Most Competitors
  • Low Prices, Huge Selection
  • Torque: 35 to 5,700 Ounce-Inches
  • Sizes: NEMA 17, 23, 34 and 42
  • 1.8-Degree, High-Torque Stepper Motors
  • Up to Four Stack Lengths, Several Windings in Each Frame Size
  • Meets Splash-Proof Requirements
  • Made for Harsh or Humid Environments
  • Protective Shaft Seal for Longer Life Cycle
  • Torque: Up to 4,000 Ounce-Inches
  • Sizes: NEMA 11, 17 and 23
  • Cost-Effective Stepper Motor with Gearbox
  • High-Torque in Compact Package
  • Offered in Five Stack Lengths
  • Available in 14 Gear Ratios
  • Torque: Up to 3,500 Ounce-Inches
  • Sizes: NEMA 23 and 34
  • Cost-Effective Stepper Motor with Spur Gearbox
  • Available Up to 12 Gear Ratios
  • Customization is Available
  • Torque: 300 to 4000 g-cm of Torque
  • Sizes: 24 to 42mm Diameter
  • PM Stepper Motor with Integrated Gearbox
  • Precise Motion at a Low Cost
  • Customization is Available
  • 100 Piece Minimum Order Requirement
  • Linear Force: 40 to 279 lbs.
  • Sizes: NEMA 11, 17, 23 and 34
  • Converts Rotary Motion to Linear Motion
  • 6 or 12 Inch Lead Screws, with Several Pitches
  • Four and Six-Lead Wire Configurations
  • Customization Is Available
  • Linear Force: 12.5 oz-in
  • Sizes: NEMA 17
  • Converts Rotary Motion to Linear Motion
  • Four-Lead Wire Configuration
  • Customization Is Available
  • Linear Force: 2 to 22.2 lbs.
  • Sizes: 20 to 57mm Diameter
  • Converts Rotary Motion to Linear Motion
  • Simple, Cost-Effective Design
  • Four or Six-Lead Wire Configurations
  • Customization Is Available
  • Linear Force: 2 to 22.2 lbs.
  • Sizes: 20 to 42mm Diameter
  • Converts Rotary Motion to Linear Motion
  • Simple, Cost-Effective Design
  • Four or Six-Lead Wire Configurations
  • Customization Is Available
  • Torque: 31 to 1,700 Ounce-Inches
  • Sizes: NEMA 17, 23 and 34
  • High-Torque, 1.8 Degree Stepper Motors
  • Over-Temperature and Short-Circuit Protection
  • Microstep Driver, Resolutions up to 1,600spr
  • Cable, Connector or Encoder Adder Options
  • Special Windings and Shaft Modifications Available
  • Torque: 31 to 425 Ounce-Inches
  • Sizes: NEMA 17 and 23
  • High-Torque, 1.8 Degree Stepper Motors
  • Integrated Driver with Easy-to-Use Controller
  • Microstep Driver, Resolutions up to 1,600spr
  • Encoder Adder Options
  • Special Windings and Shaft Modifications Available
  • Easy-to-Use, FREE Software with Purchase
  • Driver Type: 110VAC or 220VAC Input
  • Current Range: 0.5 to 12.5 Amps
  • Bilevel, Microstep and Line-Powered Drivers
  • PCB, Modular and Enclosed Packaging Styles
  • Offered as One to Four-Axis Units
  • Driver, Power Supply in Fan-Cooled Packages
  • Driver Type: DC Input
  • Current Range: 0.2 to 12.5 Amps
  • High-Performance, Bilevel and Microstep
  • Also Available are L/R and Legacy Drivers
  • PCB, Modular/Enclosed Packaging Styles
  • Offered as Single-Axis Units
  • Requires DC Power Supply
  • Driver Type: Transformer - AC Input
  • Current Range: 1.0 to 10.0 Amps
  • Bilevel and Microstep Drivers
  • PCB, Modular/Enclosed Packaging Styles
  • Offered as Single-Axis Units
  • Requires Transformer
  • Linear Ramping Pulse Generator with Bracket
  • Compatible with Anaheim Automation Drivers
  • Adjustable Base and Max Speeds
  • 2 Speed Ranges, Up to 20,000 pulses/second
  • Control of Acceleration and Deceleration
  • Perfect for Repetitive Motion Requirements
  • Compatible with Anaheim Automation Drivers
  • Internal Index Count Switches
  • Inputs for External Count Modules
  • Pulse Rates up to 14,792 Pulses Per Second
  • Index on the Fly Capability
  • Cost-Effective Motion System
  • Compatible with Anaheim Automation Drivers
  • Command Sets: 18 or 40 Simple Commands
  • Can Daisy-Chain to Control up to 99 Axes
  • Easy-to-Use, FREE Software with Purchase
  • Compact and Rugged Modular Packaging
  • Driver Type: Drivers/Pulse Generators
  • Current Range: 0.5 to 10.0 Amps
  • Bilevel and Microstep Drivers
  • PCB, Modular/Enclosed Packaging Styles
  • Offered as Single-Axis Units
  • Driver, Pulse Generator and Power Supply Packages
  • Driver Type: Drivers/ Preset Indexers
  • Current Range: 0.5 to 12.5 Amps
  • High-Performance, Bilevel and Microstep Drivers
  • Offered as One or Two-Axis Units
  • Counter Modules Available Separately
  • Driver, Indexer and Power Supply Packages
  • Driver Type: Drivers/Controllers
  • Current Range: 0.5 to 10.0 Amps
  • Bilevel and Microstep Drivers
  • Modular and Enclosed Packaging Styles
  • Single-Axis, Daisy-Chained for Multi-Axes
  • Driver, Controller and Power Supply Packages
  • Easy-to-Use, FREE Software with Purchase

Brushless DC
  • Torque: 0.7 to 900 Ounce-Inches
  • Sizes: Ten sizes from NEMA 09 to 48
  • Huge Selection with a Large Stock Base
  • Ideal Solution for Velocity Control Applications
  • Customization for Voltage, Current and Max Speed
  • Round-Bodied, Square Flange and Square-Faced Styles
  • Shaft Modifications and Motor Adders Available
  • Torque: 0.7 to 900 Ounce-Inches
  • Sizes: NEMA 23 and 34
  • Meets Splash-proof Requirements
  • Ideal for Harsh or Humid Environments
  • Protective Shaft Seals for Longer Life Cycles
  • Up to Five Stack Lengths, Several Windings
  • Customization and Motor Adders Available
  • Sizes: NEMA 09, 11, 17 and 23
  • Speeds: Less than 500 to 15,000RPM
  • Closed-Loop Control for Velocity Applications
  • Round-Bodied BLDC Motor/Planetary Gearbox
  • Shaft Modifications and Motor Adders Available
  • Sizes: NEMA 23 and 34
  • Speeds: Less than 225 to 11000 RPM
  • Closed-Loop Control for Velocity Applications
  • BLDC Motor Integrated with Spur Gearbox
  • Shaft Modifications and Motor Adders Available
  • Speed: Up to 4,000RPM
  • Sizes: NEMA 17 and 23
  • DC Brushless Motor with Built-In Speed Controller
  • Matched Components Eliminates Selection Errors, Reduces Wiring
  • Customization for Voltage, Current, and Max Speed is Available
  • Protection Against Over-Current, Hall Sensor Error, and Under-Voltage
  • Shaft Modifications and Motor Adders Are Available
  • Input Ranges: 6 to 50VDC
  • Max Power: 24 to 250 Watts
  • Peak Current: 3 to 10Amps
  • Low-Cost Speed Controllers
  • Covers a Wide Range of Motors
  • Printed Circuit Board Style
  • Overcurrent and Undervoltage Protection
  • Input Ranges: 10 to 50VDC or 85 to 135VAC
  • Max Power: 75 to 500 Watts
  • Peak Current: 5 to 60Amps
  • Low-Cost Speed Controllers
  • Covers a Wide Range of Motors
  • Huge Selection, Six Different Series Offered
  • Printed Circuit Board and Enclosed Styles
  • Over-Current and Under-Voltage Protection
  • Input Ranges: 20 to 50VDC, or 85 to 135VAC
  • Max Power: 750 to 1,500 Watts
  • Peak Current: 15 to 60Amps
  • Low-Cost Speed Controllers
  • Covers a Wide Range of Motors
  • Three Different Series Offered
  • Enclosed Styles
  • Over-Current and Under-Voltage Protection

Gearboxes
  • Sizes: NEMA 23, 34 and 42
  • Gear Ratios: Up to 33 Ratios from 3:1 to 1,000:1
  • Backlash: As Low as 7 Arc-Min for Precision Series
  • Torque Up To 167,808 Ounce-Inches
  • Precision Clamping System
  • Compatible with Most Servo, Stepper, AC or DC Motors
  • Maintenance-Free, Lifetime Lubrication
  • Sizes: NEMA 17, 23, 34, and 42
  • Gear Ratios: From 3:1 to 512:1
  • Backlash: As low as 8 Arc-Min
  • Torque Up To 113.280 Ounce-Inches
  • Precision Clamping System
  • Compatible with Most Servo, Stepper, AC or DC Motors
  • Maintenance-Free, Lifetime Lubrication
  • Sizes: NEMA 17, 23, 34 and 42
  • Gear Ratios: 22 Ratios from 3:1 to 512:1
  • Backlash: As low as 5 Arc-Min
  • Torque Up To 36,816 Ounce-Inches
  • Right Angle Ideal for Redirecting Power Flow
  • Maintenance-Free, Lifetime Lubrication
  • Compatible with Most Servo, Stepper, AC or DC Motors
  • Sizes: NEMA 23, 34 and 42
  • Gear Ratios: Ratios from 3:1 to 64:1
  • Backlash: As Low as 16 Arc-Min
  • Life: 30,000 Hours Design Life
  • Torque Up To 36,816 Ounce-Inches
  • Patented Precision Clamping System
  • High Durability, 96% Efficiency
  • Maintenance-Free, Lifetime Lubrication
  • Sizes: 60mm, 70mm, 80mm, and 90mm
  • Gear Ratios: Up to 20 Ratios from 3.6:1 to 1800:1
  • Torque Up To 2,777 Ounce-Inches
  • To be mated with ACP-MxI AC Induction Motors
  • Cost-Effective Solution
  • Strengthened Gearhead option for select models

Servo
  • Rated Torque: 91 to 338 Ounce-Inches
  • Rated Speed: 3,000 RPM
  • Flange Sizes: 60-80mm
  • Industrial-Grade Intelligent Power Modules
  • IP65 Sealed Motors
  • High Overload and Disturbance Rejection
  • System Includes Power Cable, Encoder Cable, and Communication Cable
  • Rated Torque: 91 to 5,438 Ounce-Inches
  • Rated Speed: 1,000 to 3,000 RPM
  • Flange Sizes: 60-180mm
  • Industrial-Grade Intelligent Power Modules
  • IP65 Sealed Motors
  • High Overload and Disturbance Rejection
  • System Includes Power Cable, Encoder Cable, and Communication Cable
  • Rated Power: 200-1,000 Watts
  • Rated Torque: 91-450 oz-in
  • Rated Speed: 3,000 RPM
  • Rated Current: 1.3-5.3 Arms
  • Flange Size: 60-130mm
  • IP65 Sealed
  • 2,500 PPR Incremental Encoder
  • Medium Inertia to Maximum Torque
  • Brakes and Shaft Options Available
  • Rated Power: 1,000-5000 Watts
  • Rated Torque: 677-3,385 oz-in
  • Rated Speed: 2,000 RPM
  • Rated Current: 6.0-28.0 Arms
  • Flange Size: 130-180mm
  • IP65 Sealed
  • 2,500 PPR Incremental Encoder
  • Medium Inertia to Maximum Torque
  • Brakes and Shaft Options Available
  • Rated Power: 1,000-4,000 Watts
  • Rated Torque: 1,352-5,438 oz-in
  • Rated Speed: 1,000 RPM
  • Rated Current: 6.0-24.0 Arms
  • Flange Sizes: 130-180mm
  • IP65 Sealed
  • 2,500 PPR Incremental Encoder
  • Medium Inertia to Maximize Torque
  • Brakes and Shaft Options Available
  • High-Speed, High-Precision Servo Drives
  • Power Rating from 750 to 5,000 Watts
  • Industrial-Grade Intelligent Power Modules
  • High Overload and Disturbance Rejection
  • Higher Start-Up Torque than Most Servos
  • Modbus for Networking up to 32 Motors
  • Up to 224N of Peak Force
  • Up to 1,920 Watts
  • Overlapping Windings for Shorter Overall Length
  • Superior Thermal Efficiency
  • Features I Beam design
  • Up to 606N of Peak Force
  • Up to 1,814 Watts
  • Overlapping Windings for Shorter Overall Length
  • Superior Thermal Efficiency
  • Features I Beam design
  • Up to 1,048N of Peak Force
  • Up to 4,147 Watts
  • Overlapping Windings for Shorter Overall Length
  • Superior Thermal Efficiency
  • Features I Beam design
  • Up to 3,558N of Peak Force
  • Up to 9,677 Watts
  • Overlapping Windings for Shorter Overall Length
  • Superior Thermal Efficiency
  • Features I Beam design

Linear Components
  • Save up to 50% over competing brands
  • Ground and Precision Rolled Ball Screws
  • Delivery in 4 weeks
  • Wide Range 4mm to 100mm Diameter
  • High Precision from C0 to C10 Grade
  • Size: 15 mm to 65 mm Linear Guide Rail
  • Dynamic Load: 2000 lbs to 61,500 lbs
  • Static Load: 3,250 lbs to 94,200 lbs
  • Rail Lengths from 0.1 to 4 Meters in Stock
  • Custom Rail Sizes Available
  • Standard and Wide Matched Bearing Blocks
  • End-Seal Options: Standard or Reinforced
  • Pre-Load Classes: Standard, Light or Medium
  • Size: 3 mm to 55 mm Linear Guide Rail
  • Dynamic Load: 83 lbs to 7,350 lbs
  • Static Load: 180 lbs to 13,240 lbs
  • Rail Lengths from 0.02 to 4 Meters in Stock
  • Custom Rail Sizes Available
  • Standard and Wide Matched Bearing Blocks
  • End-Seal Options: Standard or Reinforced
  • Pre-Load Classes: Standard, Light or Medium

Brush DC
  • Torque: 0.3 to 18.5 Ounce-Inches
  • Sizes: From 20mm to 52mm
  • Cost-Effective Rotary Motion Control
  • DC Motors are Fully Reversible
  • Medical, Pump, Semiconductor Applications
  • Popular for Robotics and Hobbyists
  • Customization and Motor Adders Available
  • Designed for High-Volume Applications (many items in stock for user customers)
  • Torque: 8 to 190 Ounce-Inches
  • Input Horsepower: From 1/27 to 1/3
  • Voltage: 90VDC
  • Sizes: From 66mm to 80mm
  • Cost-Effective Rotary Motion Control
  • DC Motors are Fully Reversible
  • Double Shielded ball bearings
  • Torque: 288 to 576 oz-in
  • Frame Size: 56C
  • Speed: 1,800 and 2,500 RPM
  • Cost-Effective Rotary Motion Control
  • DC Motors are Fully Reversible
  • Totally enclosed fan cooled (TEFC)
  • Class F Insulation Means Max Temp up to
       221° F with Full Load
  • Sizes: From 22mm to 60mm
  • Continuous Torque: Up to 4,166 oz-in
  • Speed: Up to 1,350 RPM
  • Gear Ratios Ranging from 3.6:1 to 720:1
  • Custom Versions are Available
  • Sizes: From 66mm to 90mm
  • Continuous Torque: Up to 4,800 oz-in
  • Speed: Up to 1,000 RPM
  • Gear Ratios Ranging from 5:1 to 200:1
  • Custom Versions are Available
  • Sizes: From 24mm to 83mm
  • Continuous Torque: Up to 2,750 oz-in
  • Speed: Up to 1,000 RPM
  • Gear Ratios Ranging from 3:1 to 3000:1
  • Custom Versions are Available
  • Sizes: From 48mm to 95mm
  • Continuous Torque: Up to 1,504 oz-in
  • Speed: Up to 360 RPM
  • Gear Ratios Ranging up to 81:1
  • Custom Versions are Available
  • Low-Cost Speed Controller
  • Printed Circuit Board Style
  • Screw-Type Terminal Blocks for Easy Installation
  • Compatible with DC Brush Motors up to 10A Peak and 50V
  • Additionally an External Voltage Can Be Used To Control Speed
  • Short-Circuit and Over-Current Limiting Protection
  • Over-Voltage Protection

AC
  • Torque: 5.38 to 122 Ounce-Inches
  • Sizes: Sixteen Series from 60mm to 100mm
  • Round-Bodied with Square Mounting Flange
  • Self Starting
  • Reversible
  • Huge Selection, Low-Cost AC Induction Motors
  • Customization for Specific Requirements Available
  • Shaft Modifications and Motor Adders Available
  • Torque: 42 to 1,699 Ounce-Inches
  • Sizes: From 2.3 to 6.14 Inches Across Flange
  • Low-Cost AC Synchronous Motors
  • Round-Bodied with Square Mounting Flange
  • Comes with Matching Capacitor and Resistor
  • Customization for Specific Requirements Available
  • Shaft Modifications and Motor Adders Available
  • Rated Torque: 170 to 600 Ounce-Inches
  • IEC Frame Sizes: 63, 71 and 80
  • 200W to 750W Motor Capacity
  • 3 Phrase Operation at 220VAC OR 380VAC
  • All Motors are rated IP55
  • Lower Heat Generation compared to Competitors; Increased life time
  • Flange Mount or Foot (leg) mount options available
  • Output shaft's oil seal prevents dust and water damage
  • Torque: 16 to 5,664 Ounce-Inches
  • Sizes: 60mm to 100mm
  • Low-Cost AC Motors with Spur Gearboxes
  • Round-Bodied with Square Mounting Flange
  • Customization for Specific Requirements Available
  • Shaft Modifications and Motor Adders Available
  • Reversible
  • Torque: Up to 56 Ounce-Inches at 30rpm
  • Sizes: 44mm and 50mm
  • Low-Cost AC Synchronous Gearmotors
  • Round-bodied with Square Mounting Flange
  • Frequently Used in Appliances, Displays, Printers, Timers, Pumps, etc.
  • Customization for Optimizing Current, Voltage, Torque and Max Speed
  • Shaft Modifications and Motor Adders Available
  • Torque: 708 oz-in to 27,614 oz-in
  • Power: 200Watts to 750Watts
  • Gear Ratios from 5:1 to 200:1
  • Shaft Diameters from 18mm to 40mm
  • Foot and Flange-Mount Options Available
  • Low-Cost AC Industrial Gearmotors
  • Compact Size, High Efficiency
  • IP55 Protection
  • Class F Insulation
  • Input Range: 110VAC or 220VAC
  • Max Power: 25W to 200 Watts
  • Closed Loop Operation Available
  • RPM Display Available
  • Simple, Cost-Effective Design
  • Small package designs
  • Covers a wide range of motor applications
  • Customization Is Available
  • Input Range: 230 or 460VAC
  • Max Power: 1 to 536 Horsepower
  • Open-Loop Speed Control
  • Detachable LCD Keypad Offers a User-Friendly Operation Interface
  • Advanced Network Functions Built-In: RS485, BACnet and MODBUS
  • Modular Design for Flexible Extension and Ease-of-Maintenance
  • Greatly Improve Efficiency of Variable Torque and Constant Horsepower Load Applications
  • Excellent for Fan and Pump Applications

HMI/PLC
  • High-Performance CPU
  • Option for Integrated SCADA
  • Run Visual Basic Scripts
  • Exchange Data with Database Management Systems
  • Simultaneously Communicate with PLCs and Other Measuring Devices
  • High Definition
  • Serial and Ethernet Ports
  • 65536 True Color TFT LCD
  • 32-bit 400, 520, 624 or 800 MHz RISC CPU
  • 8M FLASH ROM and 16M SDRAM
  • 256KB Recipe Memory
  • Powerful Timer Function
  • Supports Simultaneous Communication of Multiple Serial Ports
  • Monochrome STN LCD
  • Highly Functional CPU
  • Space-Saving Design
  • PLC Ports Allow the User to Monitor and Control the Variables of Additionally Connected Devices
  • 500 Interactive Programmable Pages
  • Various Bitmap Fonts Supported
  • Supports RS232/RS422
  • High Reliability and Performance
  • Combined Remote I/O and Expansion Capability
  • Excellent Compatibility and Scalability
  • Compact Size
  • High Processing Speed
  • Interactive Engineering Software (CICON)
  • High Performance 32-Bit, 520 MHz CPU
  • Minimum Cycle Time of 0.1ms
  • CANopen 2.0 Communication
  • Supports Remote Downloading/Monitoring/    Debugging
  • 2 CAN Ports, 2 Serial Ports, 1 Ethernet Port
  • 2MB Program Memory
  • Photoelectric Isolation I/O
  • Cost-Effective Solution with High Performance
  • Reduce Wiring and Programming Time
  • 7" Touch Screen with Relay DI8/DO8
  • Ethernet & Serial (RS232/RS485)
  • Max 3 PLC-S Module Expansion
  • MODBUS TCP & RTU
  • VNC Server
  • Over 2,000 Images for Applications
  • Program HMI and PLC with One Connector
  • Up to 32 PLC I/O Ports
  • 28 Basic Commands, 220 Application Commands
  • Dual Axis Stepper Control
  • COM Ports: RS232C, RS422 and Ethernet
  • High-Functional CPU
  • Various Bitmap Fonts Supported
  • Bluetooth I/O Module
  • 8 Inputs/8 Outputs
  • Analog/Digital/Interrupt Inputs
  • Timer Interrupts
  • Configure Inputs as Pull Ups or Pull Downs
  • Store 2KB of Program Memory
  • Run Several Routines
  • CANopen 2.0 Communication
  • Supports Remote Downloading/Monitoring/    Debugging
  • 127 Maximum Units/Network
  • IP20 Protection Class
  • 2 CAN Ports
  • Photoelectric Isolation I/O
  • USB I/O Module
  • 8 Inputs/8 Outputs
  • Analog/Digital/Interrupt Inputs
  • Timer Interrupts
  • Configure Inputs as Pull Ups or Pull Downs
  • Store 2KB of Program Memory
  • Run Several Routines
  • Include Development and Runtime Access
  • Provides 100 levels of registration for unauthorized access
  • Immediate response via alarm monitoring system
  • Access data history through internet explorer
  • Supports DDNS service
  • Access Web-View even with a firewall
  • With real-time data flow executive decisions can be made immediately.
  • Enables project deployment
  • Facilitates multiple monitoring stations
  • Offers Site monitoring and control
  • Add runtime key locks to your development key lock
  • Browser Monitoring/Control
  • Homepage Site Monitoring
  • IP Designation and Password Verification
  • Real-Time Alarm Monitoring
  • Search Data History via Web
  • Supports DDNS service
  • Communication through Windows Firewall
  • Monitors Site Status through CIMON-VIEW Client
  • Different Levels of Permissions
  • Security Access Features
  • Communication through Windows Firewall
  • No Key Lock Necessary
  • User friendly interface
  • Monitors/Controls Site Status through CIMON-VIEW Client
  • Different Levels of Permissions
  • Security Access Features
  • Communication through Windows Firewall
  • No Key Lock Necessary
  • User friendly interface

Tables
  • Travel Options: 0.4 - 18 Inches
  • Accuracy: 0.003 Inches
  • Speed: Up to 12 Inches Per Sec.
  • Supported Rails, Low-Profile Design
  • Heavy Duty Applications, Up to 8,000 lbs.
  • Motor and Encoder and Cable Options
  • Travel Options: 200 - 1240mm
  • Accuracy: 20µm
  • Speed: Up to 59 Inches Per Sec.
  • Dynamic loads up to 6699 lbs
  • Motor and Encoder and Cable Options
  • Build Part Number to your Requirements

Encoders
  • Low-Cost; Compact Rugged Housing
  • Tracks 0 to 100,000 Cycles Per Second
  • Compatible with .059" to 1.00" Shaft Size Diameters
  • 32 to 2,500 Cycles Per Revolution (CPR)
  • 128 to 10,000 Pulses Per Revolution (PPR)
  • Operating Temperature of -40 to +100°C
  • Powered From a Single +5VDC Power Supply
  • Optional Third Index Channel
  • 2-Channel Quadrature Squarewave Outputs
  • Allows for ± .010" Axial Shaft Play
  • RoHS Compliant and REACH Certified
  • 8-14 Bit Programmable Resolution
  • Tracks 0 to 200,000 Cycles Per Second
  • Compatible with .125" to 1.125" Shaft Size Diameters
  • 100 to 2,560 Cycles Per Revolution (CPR)
  • 400 to 10,240 Pulses Per Revolution (PPR)
  • Operating Temperature of -40 to +100°C
  • Powered From a Single +5VDC Power Supply
  • Optional Third and Fourth Index Channel
  • 2-Channel Quadrature Squarewave Outputs
  • Allows for ± .005" Axial Shaft Play
  • RoHS Compliant
  • Differential Outputs for A/B/Z Channels
  • U/V/W Commutation Outputs
    (Differential or Open-Collector)
  • Compatible with .197" to .394"
    Shaft Size Diameters
  • 500 to 10,000 Cycles Per Revolution (CPR)
  • 2,000 to 40,000 Pulses Per Revolution (PPR)
  • Operating Temperature of -20° to +105° C
  • Powered From a Single +5VDC Power Supply
  • Allows for ± .005" Axial Shaft Play
  • Frequency Response from DC up to 1 MHz
  • RoHS Compliant

Couplings
  • Type: Clamp Type Coupling
  • Rated Torque: Up To 133 Inch-Pounds
  • Variety of Outside, Minor and Major Diameters
  • Never Requires Maintenance
  • No Backlash
  • Type: Set Screw Type Coupling
  • Rated Torque: Up To 33 Inch-Pounds
  • Variety of Outside, Minor and Major Diameters
  • Never Requires Maintenance
  • No Backlash
  • Type: Clamp Type Coupling
  • Screw Torque: Up To 800 Ounce-Inches
  • Variety of Outside, Minor and Major Diameters
  • Never Requires Maintenance
  • No Backlash
  • Type: Clamp Type Coupling
  • Screw Torque: Up to 1,130 Ounce Inches
  • Short Compact Design
  • Vibration damping
  • Backlash-free

Integrated Circuits
  • Controls two-phase Bipolar and four-phase Unipolar motors
  • Two PWM and Four Phase outputs for H-Bridge control.
  • Supply Voltage: 3V to 5.5V
  • Full, 1/2, 1/4, 1/8, 1/16, 1/32, step mode
  • PWM chopper circuit for current control
  • 8-bit PWM resolution
  • Max step rate of 30k per second
  • Open or closed loop control
  • 3 or 4 phase operation
  • OVERCURRENT SENSING disables output drivers
  • Speed controlled by Pulse Width Modulation of output drivers
  • HALL SENSOR inputs control output commutation sequence for electrical sensor spacings of 60°, 120°, 240°, or 300°
  • Touch or Pushbutton input controls
  • Up to 10 selectable speed (power) levels
  • A selected speed level input becomes an output that can drive a LED to indicated the selected speed
  • Operates with 50/60Hz line frequency
  • Rugged, latchup-free process technology
  • Interfaces Incremental Encoders to up/down Counters
  • Converts Quadrature Pulses to up/down Counter Controls
  • Index I/O (LSI-LS7082N)
  • 4.5V to 10V Operation
  • x1, x2, x4 Frequency Multiplication:
  • Programmable output clock pulse width

Accessories
  • Single-Ended or Differential Encoders
  • Low-Cost, Compact Rugged Housing
  • For NEMA 08 to 42 Motors
  • Tracks from 0 to 100,000 Cycles Per Second
  • 32 to 2,500 Cycles Per Revolution
  • Encoder Cables Available, Purchased Separately. See Series Spec Sheet for matching cable part numbers.
  • Compact Friction Brakes Available in 4 Series
  • NEMA 23: Up to 80 Ounce-Inches Torque
  • NEMA 34: Up to 1,152 Ounce-Inches Torque
  • NEMA 42: Up to 1,152 Ounce-Inches Torque
  • Purchased Separately or as Motor Adders
  • RS-485 to USB Data Converter
  • Supports Baud Rate from 75 to 115.2kbps
  • No External Power Supply Required
  • Input Voltage: 115/230VAC
  • Output Voltage: 5V to 80V
  • Peak Current: 4A to 8A
  • Power: 160W to 325W
  • Input Voltage: 90-265VAC
  • Output Voltage: 5V to 48V
  • Peak Current: 1.2A to 2.7A
  • Power: 65W to 125W
  • Input Voltage: 85-265VAC or 90-132VAC/180-264 VAC
  • Output Voltage: 24-48V
  • Peak Current: 3.3A to 14.6A
  • Power: 150-350W
  • RS232-RS422 and RS232-RS485 Models
  • Bi-Directional Data Converters
  • Unit with Power Supply or PC Port-Powered
  • Noise Immunity Over Long Distances
  • Compatible with Anaheim Automation Controllers
  • Fits on Motors and Cables
  • Convenient and Durable
  • Easy to Connect and Disconnect
  • RoHS Compliant
  • Fits on Motors and Cables
  • Perfect for Wire-to-Wire Configurations
  • Ideal for Power Applications up to 9.0A per circuit
  • RoHS Compliant
  • Bore sizes from .059" to 1.00"
  • Suitable for Optical Encoders

© 2011 Anaheim Automation, Inc. - All Rights Reserved