Brushless DC Products


  • Input Ranges: 6 to 50VDC
  • Max Power: 24 to 250 Watts
  • Peak Current: 3 to 10Amps
  • Low-Cost Speed Controllers
  • Covers a Wide Range of Motors
  • Printed Circuit Board Style
  • Overcurrent and Undervoltage Protection
  • Input Ranges: 10 to 50VDC or 85 to 135VAC
  • Max Power: 36 to 500 Watts
  • Peak Current: 3 to 60Amps
  • Low-Cost Speed Controllers
  • Covers a Wide Range of Motors
  • Huge Selection, Six Different Series Offered
  • Printed Circuit Board and Enclosed Styles
  • Over-Current and Under-Voltage Protection
  • Input Ranges: 20 to 50VDC, or 85 to 135VAC
  • Max Power: 750 to 1,500 Watts
  • Peak Current: 15 to 60Amps
  • Low-Cost Speed Controllers
  • Covers a Wide Range of Motors
  • Three Different Series Offered
  • Enclosed Styles
  • Over-Current and Under-Voltage Protection
  • Speed: Up to 4,000RPM
  • Sizes: NEMA 17, 23, and 34
  • DC Brushless Motor with Built-In Speed Controller
  • Matched Components Eliminates Selection Errors, Reduces Wiring
  • Customization for Voltage, Current, and Max Speed is Available
  • Protection Against Over-Current, Hall Sensor Error, and Under-Voltage
  • Shaft Modifications and Motor Adders Are Available






Voltage: DC
Torque:
oz*in
 N*m
lb*in
Speed: RPM
Single Shaft
 Dual Shaft



  • Torque: 0.7 to 900 Ounce-Inches
  • Sizes: Ten sizes from NEMA 09 to 48
  • Huge Selection with a Large Stock Base
  • Ideal Solution for Velocity Control Applications
  • Customization for Voltage, Current and Max Speed
  • Round-Bodied, Square Flange and Square-Faced Styles
  • Shaft Modifications and Motor Adders Available
  • Torque:13.5 to 15.5 Ounce-Inches
  • Sizes:Two Sizes from 42mm to 57mm Frame
  • Customization for Voltage, Current and Max Speed
  • Round-Bodied, Square Flange and Square-Faced Styles
  • Shaft Modifications and Motor Adders Available
  • Brushless DC Motor with External Ballscrew
  • Torque: 0.7 to 900 Ounce-Inches
  • Sizes: NEMA 23 and 34
  • Meets Splash-proof Requirements
  • Ideal for Harsh or Humid Environments
  • Protective Shaft Seals for Longer Life Cycles
  • Up to Five Stack Lengths, Several Windings
  • Customization and Motor Adders Available
  • Sizes: NEMA 09, 11, 17 and 23
  • Speeds: Less than 500 to 15,000RPM
  • Closed-Loop Control for Velocity Applications
  • Round-Bodied BLDC Motor/Planetary Gearbox
  • Shaft Modifications and Motor Adders Available
  • Sizes: NEMA 23 and 34
  • Speeds: Less than 225 to 11000 RPM
  • Closed-Loop Control for Velocity Applications
  • BLDC Motor Integrated with Spur Gearbox
  • Shaft Modifications and Motor Adders Available
  • External Linear with Ballscrew
  • Voltage: 24VDC
  • Rated Torque: 13.5, 15.5 oz-in
  • 2mm, 5mm Travel Per Revolution
  • 4 Digit RPM Readout
  • Displays 0-9999 RPM
  • Operates from 12V-48V
  • Hall input voltage 3.5V-24V
  • Input Voltage: 12VDC
  • Max Clamped Voltage : 27V/54V
© 2019 Anaheim Automation, Inc. - All Rights Reserved