HMI Hello World

This video demonstrates how to create a Hello World program on an HMI. This tutorial will walk you through the steps of creating a new frame, writing text to the frame, and displaying the frame. This example will show you the basics of handling and managing windows and frames.

How to Update Kinco HMI Drivers

This video will walk you through the process of assigning our HMI device the correct device drive. Often, Windows will automatically assign what a device driver, but it will not be the best-suited driver. This video will instruct you on correcting this error.

Adding Your Logo to an HMI

This video demonstrates how to add your own logo to an HMI on Start Up. This tutorial will walk you through the steps of importing a new logo and displaying it at start up.

VFD Control: How to Control a Kinco VFD Using HMI Modbus RTU

In this tutorial, you will learn how to control a Kinco CV100-2S-0007G VFD using the MT4434TE HMI with the Modbus RTU protocol.

HMI-KNC Ethernet Program Download

This tutorial will walk you through the setup process for downloading your program to the Kinco Series HMI. This allows you to remotely program your HMI as long as you are on the same default gateway. Ethernet download allows you to leave your existing application intact and make updates at will.

Introduction to HMI Bit Control Components

An overview of basic components in the HMIWare editing software, such as bit state lamp, bit state setting and bit state switch.s

Creating One Button for Two Commands

This video demonstrates how to send two commands to a controller from a single HMI button using a Bit State Setting, Macro's and a PLC Control component. This demonstration introduces you to the PLC Control component which has several different usages, using one bit register to perform multiple operations is just one.

HMI:Send ASCII Commands to Controller

This video demonstrates how to create a program on an HMI which will send ASCII commands to a controller. This tutorial will walk you through the steps of formatting your text, storing your text and how to send your text from the HMI to the controller. With this simple tutorial you can easily export the ASCII commands specific to your controller.

HMI: Servo Analog Control

This video demonstrates Servo Motor Analog Speed control through an HMI and PLC. We cover all of the necessary parameters that need to be set in the PLC and create a GUI in the HMI to access the necessary registers in the PLC.

HMI: Timer Function

This video demonstrates how to create a Timer and use a macro in a program to display time on an HMI. This tutorial will walk you through the steps of creating a timer, macro, number display and displaying the frame. This example will show you the basics of handling a timer control.

How to Select an HMI for Your Application

Do you need an HMI for your application, but don't know where to start? In this video we will discuss the steps for choosing the ideal HMI for your project.